Device, EM, SNR & MVA association with end user

[Syed]

Dear All,

My client servers are on running on CUCM 8.5.1 version.

If I associate IP phone and enable EM, SNR & MVA with end user, does it make any difference in license?

Thank you

[Suresh Hudda · Accepted solution]

Hi Sayed,

Yes, enabling mobility will consume extra DLUs. Each device is assigned a unit number based on the type and capabilities of the device. Devices with more complex and high-end capabilities are assigned a higher number of units.

You can check in license unit calculator "Mobile enabled end users"

For information go through below doc.

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/7_1_2/ccmsys/accm-712-cm/a02licen.pdf

Suresh

[Syed]

Hi Suresh,

Thank you so very much for your help & support.

I have gone through the document provided and found it informative.

In this version of CUCM licensing is completely based on device and not on user, I am right? (meaning, unlike CUCM 9.x).

[Suresh Hudda]

Yes, it based on device type and what you configure on it...9.X version onwards it got changed.

Suresh