Device Pack 7.1.5.35118-3 on CUCM 7.1.5.35900-7

[Louis-Philippe Descamps]

Hi

i just upgrade cucm to 7.1.5.35900-7 and was wondering if I had to install that DP.

The release doc says

Cisco Unified IP Phones

Cisco Unified Communications Manager Device Package Release 7.1(5) provides the following updates for Cisco Unified IP Phones:

• Release 9.3(3) for Cisco Unified IP Phone 6921, 6941, 6945, and 6961

• Release 1.4(4) for Cisco Unified Wireless IP Phone 792x

• Release 9.3(1) SR1 for Cisco Unified IP Phone 6901 and 6911

All other Cisco IP Phone firmware is identical to the Cisco Unified Communications Manager 7.1(5) release.

I dont use any 6921,6941,6945,6961,792x,6901,6911 YET.... but could be in the future

Do I understand right that the DP just update for these devices above?

just for the sake of it i would install them so they are on system....

any advice?

thanks

[Rob Huffman · Accepted solution]

Hi Louis-Philippe,

This would not be considered a "must have" requirement but

rather an optional addition if you were using those phone models

Cheers!

Rob

"go easy...step lightly...stay free " 

- The Clash

[Louis-Philippe Descamps]

Hi Rob,

I will do it so it s there :-)

thanks