05-30-2013 07:27 AM - edited 03-16-2019 05:36 PM
Hi
i just upgrade cucm to 7.1.5.35900-7 and was wondering if I had to install that DP.
The release doc says
Cisco Unified IP Phones
Cisco Unified Communications Manager Device Package Release 7.1(5) provides the following updates for Cisco Unified IP Phones:
• Release 9.3(3) for Cisco Unified IP Phone 6921, 6941, 6945, and 6961
• Release 1.4(4) for Cisco Unified Wireless IP Phone 792x
• Release 9.3(1) SR1 for Cisco Unified IP Phone 6901 and 6911
All other Cisco IP Phone firmware is identical to the Cisco Unified Communications Manager 7.1(5) release.
I dont use any 6921,6941,6945,6961,792x,6901,6911 YET.... but could be in the future
Do I understand right that the DP just update for these devices above?
just for the sake of it i would install them so they are on system....
any advice?
thanks
Solved! Go to Solution.
05-30-2013 07:33 AM
Hi Louis-Philippe,
This would not be considered a "must have" requirement but
rather an optional addition if you were using those phone models
Cheers!
Rob
"go easy...step lightly...stay free "
- The Clash
05-30-2013 07:33 AM
Hi Louis-Philippe,
This would not be considered a "must have" requirement but
rather an optional addition if you were using those phone models
Cheers!
Rob
"go easy...step lightly...stay free "
- The Clash
06-03-2013 04:57 AM
Hi Rob,
I will do it so it s there :-)
thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide