cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
187
Views
5
Helpful
1
Replies
Beginner

Dividing of PVDM3-32 for configuration 2 E1 ports

Hello!

 

Could you please help me with such question:

I have a router 2921 with PVDM3-32 module, 2 VWIC3 1 port E1 modules, I want to configure 2 E1 ports, can I configure one E1 port with pri-group timeslots 1-10,16 and the second one with pri-group timeslots 1-20 for example. Can I divide my PVDM-32?

Will this configuration work?

Thanks a lot!

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
VIP Mentor

Re: Dividing of PVDM3-32 for configuration 2 E1 ports

Yes you can as long as your dsps are not been used by any other resources such as transcoders, mtp or CFB

 

Please refer here for a better  understanding on dsp credit allocation

https://supportforums.cisco.com/t5/collaboration-voice-and-video/cisco-pvdm2-and-pvdm3-dsp-credit-mips-allocation/ta-p/3142302

Please rate all useful posts

View solution in original post

1 REPLY 1
Highlighted
VIP Mentor

Re: Dividing of PVDM3-32 for configuration 2 E1 ports

Yes you can as long as your dsps are not been used by any other resources such as transcoders, mtp or CFB

 

Please refer here for a better  understanding on dsp credit allocation

https://supportforums.cisco.com/t5/collaboration-voice-and-video/cisco-pvdm2-and-pvdm3-dsp-credit-mips-allocation/ta-p/3142302

Please rate all useful posts

View solution in original post

CreatePlease to create content