cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
326
Views
0
Helpful
1
Replies

E 164 dialing local numbers

rhegde
Level 1
Level 1

Hi,

I have a situation where I am sending the local US calls in + E 164 (1+10 digits) format but the service provider expects to receive only 10 digits. If I send the calls to him in 11 digits we get a message that, send only 10 digits. How do we over come this issue ?

This may not be unique situation as some states ,  we need to send 10 digit for local calls and 11 digits for toll calls with the same area code.

Rav

1 Reply 1

Jonathan Schulenberg
Hall of Fame
Hall of Fame

You need to use transformation patterns on the off-net gateway/trunk to localize the values. If you have an NPA requiring 10-digit subscriber dialing, you can do it on the IOS gateway using translation profiles if you prefer. Typically this isn't feasible if you're in an NPA that offers seven-digit subscriber dialing.

Cisco SRND:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/8x/dialplan.html#wp1172104

NANPA NPA Tool (Dialing Plan is in the lower-right of the table):

http://nanpa.com/nas/public/npa_query_step1.do?method=resetNpaReportModel