E1/T1 Information

[opnineopnine]

Hello 

I have an E1 and I would like to know how I can see how many digits its sending?

Thanks all.

[Wilson Samuel]

Hi,

Is it E-1 PRI or E-1 R2?

Could you please share the config?

Regards

[opnineopnine]

Its a E-1 PRI

thanks. 

[Terry Cheema]

Just turn on debug isdn q931, it should show you the basic calling and called party info its sending to Telco switch.

If you need more details about the call use the debug voip ccapi inout as suggested by Marcelo.

-Terry

Please rate all helpful posts

[Wilson Samuel]

Thanks Terry, as usual great answer (+5).

The debug isdn q931 will give you the detailed information about Calling and Called Number as well the Type and Plans for the calling/called party.

[Terry Cheema]

Thanks for the rating wilson.

[Marcelo Morais]

Hi,

 you can use the debug voip ccapi inout and look for the dest info inside the IE subfields.

 For more info, check the link: Troubleshooting and Debugging VoIP Call Basics

Note: Wilson Samuel asked an important question ... the info about what kind of E1 you are using is always important.

Hope this helps.

[opnineopnine]

Hello Marcelo

Do you mean this parte

*Mar 15 22:07:20.327: cc_api_call_digit
(vdbPtr=0x81B09EFC, callID=0x58, digit=5?

Thanks

[Marcelo Morais]

Hi,

 yes, the cc_api_call_digit shows the digit by digit that the VTSP passes to CCAPI.

If you look for the callID parameter (in your example 0x58), then you will be able to find all the digits that you collect.

Hope this helps.