08-23-2020 11:37 PM
i have cucm and a mgcp gateway on a 28xx router. i tried to enable ssh on it with the following steps:
-the gw hostname already matches the domain on the cucm gw config
-added customer domain which is different than the hostname
-generated key 2048
-set ssh ver 2
afterward all calls stopped coming out and coming in . I have already read somewhere that if the domain on the gw is different than the domain on the cucm it will cause the gw to de-register but im confused as in the document it says
only gw name have to match? what am i missing here?
Solved! Go to Solution.
08-23-2020 11:47 PM - edited 08-23-2020 11:51 PM
You need to use the new domain name in CUCM gateway page.
and on router give "no mgcp" and "mgcp"
08-23-2020 11:47 PM - edited 08-23-2020 11:51 PM
You need to use the new domain name in CUCM gateway page.
and on router give "no mgcp" and "mgcp"
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide