08-07-2015 04:02 AM - edited 03-17-2019 03:55 AM
Hi,
I have an issue where after calls have cycled through an ephone-hunt list it will not go to the voicemail of the original called extension
My configuration is as follows
ephone-dn 50 dual-line
number 6700
label Reception
description 6700
name Reception
call-forward all 6716
corlist incoming Bronze
huntstop channel
ephone-dn 15 dual-line
number 6716
label Reception One
description 6716
name Reception One
call-forward busy 90013
call-forward noan 90013 timeout 8
corlist incoming Bronze
huntstop channel
ephone-hunt login
ephone-hunt 21 peer
pilot 90013
list 5219, 5201, 6705, 6704, 6737, 5660, 5666
final 6759 <<<<<<<<<<<< ***VOICEMAIL PILOT***
preference 1 secondary 2
timeout 8, 8, 8, 8, 8, 8, 8
hops 7
Can anyone see anything obvious in the configurations above that would stop this?
I'm pretty sure that this worked previously.
Thanks
08-07-2015 08:37 AM
Hi,
Can you share the full config a long with debug voice ccapi inout
08-08-2015 08:08 PM
Unfortunately this is the default behaviour of "voice hunt" and "ephone hunt'" in CME, as hunt will over-ride the call-fwd functionality.
This is tried and tested and working as per design and hence you see the call hitting the voicemail.
Avoid using call-fwd in hunt for now.
-Regards,
Kevin
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide