12-05-2018 07:53 AM - edited 03-17-2019 01:48 PM
I have a remote 8841 phone and I am able to login with my user account through the MRA service. However, I am unable to logout of the phone when I choose Extension Mobility option from the phone menu. I get an error "HTTP 404: Page not found". Below are the details of our setup. Extension Mobility has been configured by previous engineer but I'm wondering if the URL could be wrong? Currently we are using "http://emphoneserv.domain.com:8080/emapp/EMAppServlet?device=#DEVICENAME#&EMCC=#EMCC#"
CUCM version - 11.5.1.13902-2
Remote phone firmware version - sip88xx.11-7-1-17
Let me know if you need additional information. Thanks very much for the assistance here.
Solved! Go to Solution.
12-11-2018 09:26 AM
FYI - Found this thread. Looks like we need to upgrade our Expressways. https://community.cisco.com/t5/other-collaboration-subjects/expressway-server-and-extension-mobility/td-p/3217028
Thanks again for the feedback.
12-11-2018 09:27 AM
I should have mentioned earlier the EM over MRA was not supported from day-1. Extension Mobility over MRA is supported on ExpressWay vx8.10.4 and on and validated using 88XX phones
G
12-11-2018 06:03 AM
Anyone? Still trying to figure this out... Thanks.
12-11-2018 07:54 AM
Hello,
I would suggest to change
the http://emphoneserv.domain.com:8080/emapp/EMAppServlet?device=#DEVICENAME#&EMCC=#EMCC#
to http://CUCM_IPAddress:8080/emapp/EMAppServlet?device=#DEVICENAME#&EMCC=#EMCC#
Give it a try.
G
12-11-2018 08:12 AM
Thanks for the suggestion. Would I need to restart a service or just update the subscriptions?
12-11-2018 08:34 AM
You may restart first the EM services and then update the subsciptions
G
12-11-2018 09:16 AM
Thanks for the suggestion. Unfortunately that did not work. Looks like I might just need to open a TAC case. I found out today that users in the office can get to the EM options on their phones. But remote users can't. We are using MRA to connect remotely. Might be an issue with MRA.
12-11-2018 09:27 AM
I should have mentioned earlier the EM over MRA was not supported from day-1. Extension Mobility over MRA is supported on ExpressWay vx8.10.4 and on and validated using 88XX phones
G
12-11-2018 09:26 AM
FYI - Found this thread. Looks like we need to upgrade our Expressways. https://community.cisco.com/t5/other-collaboration-subjects/expressway-server-and-extension-mobility/td-p/3217028
Thanks again for the feedback.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide