04-24-2012 03:08 AM - edited 03-16-2019 10:47 AM
Hi,
We have implemented FAC, currently when we re dial the number the FAC dialled for earlier call gets displayed on the Analog phones.Analog phones are connnected on VG224 and the CUCM version is 8.6.
Is there any way where in we can suppress the display of FAC on the Analog phone.
Thanks,
Vinay
Solved! Go to Solution.
04-24-2012 03:53 AM
I am afraid you fail to understand my explanation above, so here it is again.
You are using analog phones, with these, CUCM cannot control in any way their redial button, display, speed-dial button, or any other feature that is purely local to the phone.
04-24-2012 03:45 AM
CUCM cannot control display on analog phones, same as Telco cannot control display of you home phone.
If you want the FAC not to be displayed, use IP phones, or analog phones without a display.
04-24-2012 03:50 AM
Thanks a lot for your valuable input, let me add another point here, what happens is when we press rediall on the Analog phone, irrespective of Phone with or without display, the phone dials the FAC number of the last dialled call.
Ideally, it should dial the PSTN number instead of FAC.
Thanks,
Vinay
04-24-2012 03:53 AM
I am afraid you fail to understand my explanation above, so here it is again.
You are using analog phones, with these, CUCM cannot control in any way their redial button, display, speed-dial button, or any other feature that is purely local to the phone.
04-24-2012 04:09 AM
Thanks a again, Paolo. I got the information now.
04-24-2012 04:17 AM
Thanks for the nice rating and good luck!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide