02-13-2013 08:44 AM - edited 03-16-2019 03:41 PM
Hello,
We have a client with Cisco 6921 IP Phones in a CUCM 7.1.5.31900-3. They want to increase the range of "Busy Trigger" from 1 to 2 but they cannot do it. The version of the firmware is 9.0.3.0.
Is there any firmware version that could allow to increase to 2 the Busy Trigger?
Any help is appreciated.
Regards.
Patricio
Solved! Go to Solution.
02-13-2013 08:48 AM
Hi Patricio,
You have to be running CUCM 8.6X or higher (it was fixed in 8.6) to be able to change Bussy Trigger for Cisco 6921 Phones, changing the firmware not matter what new it's will not work.
Regards
Please rate all useful posts
Favor calificar todos las respuestas útiles.
_____________________________
LinkedIn Profile: do.linkedin.com/in/leosalcie
MDGDP, CCNA, CCNA Voice certified
02-13-2013 08:48 AM
Hi Patricio,
You have to be running CUCM 8.6X or higher (it was fixed in 8.6) to be able to change Bussy Trigger for Cisco 6921 Phones, changing the firmware not matter what new it's will not work.
Regards
Please rate all useful posts
Favor calificar todos las respuestas útiles.
_____________________________
LinkedIn Profile: do.linkedin.com/in/leosalcie
MDGDP, CCNA, CCNA Voice certified
02-13-2013 01:57 PM
Thank you very much Leo!!!
Regards,
Patricio
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide