Buy or Renew
Buy or Renew
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
370
Views
0
Helpful
2
Replies

forward all programmable??

Go to solution
ralonsoespana
Level 1
Level 1

‎10-20-2008 06:35 AM - edited ‎03-15-2019 02:02 PM

Hi all,

It's possible to configure a button with a forward all + Directory Number??

thanks

Labels:
0 Helpful
2 Accepted Solutions

Accepted Solutions

Go to solution
Chris Deren
Hall of Fame
Hall of Fame

‎10-20-2008 07:15 AM

Sorry, but this is not doable. You can configure a speed dial to the DN, and then press CallFwdAll and the speeddial button.

HTH,

Chris

View solution in original post

0 Helpful

Go to solution
Jaime Valencia
Cisco Employee
Cisco Employee
In response to Chris Deren

‎10-20-2008 08:02 AM

if you got CME this can be done using an easy code that does all the work ie *86 to CFA to your mobile, but CUCM does not have the capability

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

View solution in original post

0 Helpful
2 Replies 2

Go to solution
Chris Deren
Hall of Fame
Hall of Fame

‎10-20-2008 07:15 AM

Sorry, but this is not doable. You can configure a speed dial to the DN, and then press CallFwdAll and the speeddial button.

HTH,

Chris

0 Helpful

Go to solution
Jaime Valencia
Cisco Employee
Cisco Employee
In response to Chris Deren

‎10-20-2008 08:02 AM

if you got CME this can be done using an easy code that does all the work ie *86 to CFA to your mobile, but CUCM does not have the capability

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate
0 Helpful
Customers Also Viewed These Support Documents