FXO incoming call with hunt-group issue in CME

[haibat mirzania]

Hello,

I have 4 fox port and all incoming call forward to hunt-group with 4 ex. member. Incoming call routed to sip phones properly and showing DID info but after 5 to 10 sec sip phone stop ringing and after 2 to 3 second start again ringing with  showing un-known DID info.

[HARIS_HUSSAIN]

Can you past the running configuration here.
It might be trying to ring phone as per the hunt group logic

*** Please rate helpful post & Mark "Accept as a Solution" if applicable