i only use my unity for voice mail and AA and have 52 users with voice mail, after syncing my licenses im getting a shortage as shown in the attached picture , does that mean that "Unity Connection Basic Messaging User Licenses" is used for voice mai...
Hi All, Im facing problems with my Cisco ISR, only outgoing calls are failing incoming calls are working fine. Ive tried several things - disabled early offer-enable/disable MTP in sip trunkremove keepalive options in dial-peer.However no success Ple...
Hi, The CUCM was configured to register with the Jabber Endpoint for phone services. However I see that when I try to login to the application, The Jabber app shows an error saying "Untrusted server. No services discovered." I have the certificates i...
Hello, When logging into CUCM and you are presented with this warning message. Is there any way to monitor for this occurrence? Doesn't appear to be a syslog or RTMT alert. Only if it is in overage for those. I found some OIDs but when I try to walk ...
All, We're looking at changing our PRI's over to SIP. I understand there is licensing that we will have to purchase for the SIP trunks, but will we have to make and changes to our phone configurations? Currently we use SCCP protocol...will we have ...
Hi,I am in trouble since last week and could not get the proper solution. We have PRI ISDN line 10 channels and 100 lines and integrated voice router 3825. This scenario working well for years and now my company opened a new branch office and they w...
Hi I am having CUCM 11.5.1.10000-6 and Phones are 8841 model IP Phone. Will this phone model supports Configuration File Encryption in this CUCM version? Regards,Shinas
Please correct me if I'm wording any of this wrong. Quick background, I inherited a small CUCM (Version 10.5.2) setup at a network shop with a fairly short turnover. I have very little experience but I know how to do a decent amount of the day to day...
I'm upgrading my phones (8861s) from a 10.2 firmware to 11.5. Same cluster and TFTP servers. For some reason the upgrade failed until I "Reset Security Settings" which I assume on the 88xx is the way to delete ITL. I thought that was only requir...
Hi Everyone, I am having issues migrating our SCCP phonse to SIP. After lunching the migration using Bulk Administration --> Phone --> Migrate Phone --> SCCP To SIP, all phones stay in unregistered mode. It looks like CUCM is not able to delete the S...
Hello, I am working on a problem with 10.5 cluster in Mixed mode using the old type: USB token + CTL client. After an upgrade last year certain types of phones can't be switched to Secure profile. All 79XX phones are staying unregistered, while 882...
Hi All,I tried downloading cme-b-acd-2.1.0.0.tar from the below link:http://www.cisco.com/cgi-bin/tablebuild.pl/ip-iostspBut unable to download. Please let me the correct link where I can download the same.Regards,Nirmal
Hi, sip trunk is connected to third party sip server , call coming through the sip shows a number like 8796543567 I want to transform this number to 5567 do I need to use calling party transformation css , if yes how can i do that Thanks
i have not pressed the service button but even it is showing "host not found" on the idle state of the ip phone.how to resolve this issue.
We currently have an issue where we are unable to dial internationally through our SIP trunk via our CUBE. I suspect it is because our CUBE has been incorrectly configured by the ITSP but not familiar enough with Cisco kit to figure it out. When runn...
