cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
534
Views
10
Helpful
2
Replies

FXS analogue Hotline

AhmadMA43005
Level 1
Level 1

is it possible to configure Hotline for FXS analogue CUCM SCCP.

2 Accepted Solutions

Accepted Solutions

George Sotiropoulos
Cisco Employee
Cisco Employee

Dear @AhmadMA43005 ,

Please consult the following documentation where you will find the (PLAR) feature, which allows you to configure a phone so that when the user goes off hook (or the NewCall softkey or line key gets pressed), the phone immediately dials a preconfigured number.

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/11_5_1/featureConfig/CUCM_BK_C7DC69D3_00_cucm-feature-configuration-guide_115/CUCM_BK_C7DC69D3_00_cucm-feature-configuration-guide_115_chapter_010101.html

I hope you find it useful.

George

 

Please Rate Posts (by clicking on Star) and/or Mark Solutions as Accepted, when applies

View solution in original post

2 Replies 2

George Sotiropoulos
Cisco Employee
Cisco Employee

Dear @AhmadMA43005 ,

Please consult the following documentation where you will find the (PLAR) feature, which allows you to configure a phone so that when the user goes off hook (or the NewCall softkey or line key gets pressed), the phone immediately dials a preconfigured number.

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/11_5_1/featureConfig/CUCM_BK_C7DC69D3_00_cucm-feature-configuration-guide_115/CUCM_BK_C7DC69D3_00_cucm-feature-configuration-guide_115_chapter_010101.html

I hope you find it useful.

George

 

Please Rate Posts (by clicking on Star) and/or Mark Solutions as Accepted, when applies