03-15-2014 09:41 AM - edited 03-16-2019 10:07 PM
03-15-2014 10:16 AM
You can point dial peers at other GWs, but I would not recommand it when you have centrelized environment, I would route all calls via CUCM in order to be able to manage the calls, i.e. call admission control, supplemetary features, i.e. call conference, hold, etc. So, all calls between sites arriving or going out of the GWs should be sent to CUCM. As to how to route them, simply build the GW in CUCM, assign it to Route Group, Route List and then build Route patterns.
HTH,
Chris
03-16-2014 09:31 AM
03-16-2014 09:19 PM
Hi Alan,
As Chris mentioned that centralized environment will be easier to manage so you should route internal ext to cucm even analog port. For specific route pattern to specific gw, you need to assign CSS and partition for preventing users using wrong gw. Below is a simple example:
Create Partition-A & Partition-B
Create CSS-A for site A which include Partition-A
Create CSS-B for site B which include Partition-B
Assign CSS-A to site A phones
Assign CSS-B to site B phones
Create route pattern 9.@ with Partition-A and route list for gw in site A
Create route pattern 9.@ with Partition-A and route list for gw in site B
Therefore, Site A users can reach site A gw and Site B users can reach site B gw only for pattern 9.@
Regards,
Ben
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide