08-08-2012 10:32 AM - edited 03-16-2019 12:37 PM
Hello everyone, I wondering if someone knows a command on VG to know if some device is connected to the voice port.
When I put this command:
VG202#sh stcapp dev sum
Total Devices: 2
Total Calls in Progress: 1
Total Call Legs in Use: 1
Port Device Device Call Dev Directory Dev
Identifier Name State State Type Number Cntl
---------- --------------- -------- ------------- ------- ----------- ----
0/0 AN1FCAF21730000 IS IDLE ALG 5847 CCM
0/1 AN1FCAF21730001 IS RINGIN ALG 5833 CCM
This doesn't guaranteed that analog phone is ringing, because maybe the phone cord is unplugged.
thanks in advance
Alex
Solved! Go to Solution.
08-08-2012 03:08 PM
There is no way of knowing that.
08-08-2012 03:08 PM
There is no way of knowing that.
08-13-2012 06:21 AM
Thanks Paolo,
I even tried to compare 2 ports (one with phone hooked up) searching some difference in the output of command "show voice-port" but nothing.
Thanks again for your confirmation.
Alex
08-13-2012 06:43 AM
You're welcome, please remember to rate useful posts clicking on the stars below.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide