Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Ladies and Gents . Currently I have a cluster of Unity Conn. 8.0.2 on MCS.MCS have an arrangement of two disk. the cluster is supporting 2.5K users.My doubt is about the OVF for UCS.I've made the upgrade to 9.1.2 but I used the ovf template of ...
Hi All We got two branches:Site A is registered to CUCM 8.0.2 on HQ and have HW-CFB on site.Site B is registered to CUCM 7.1.2 onsite and have HW-CFB as well.We have an ICT (Non-Gatekeeper Controlled) between CUCMs.When phone 1-A calls to phone 2-A w...
HelloI can understadn why I can't modify my call ID in local calls.Phone A (DN 7156) dial 887-1500, H323 make the call and applied a traslation rule.Oct 30 13:04:55 EDT: //-1/00FA1AE63403/RXRULE/regxrule_match: No match; number=7156 rule precedence=1...
Hello.Someone know how to activate a second license in CUE.I got 90 mailboxes activated and in use and I can't activate a second license with 60 mailboxes.Index: 5 Feature: VMIVR-VM-MBX Version: 1.0 License Type: Pe...
Hello everyone,I'm facing the problem that my CUCM is integrated with new branches with the same DN that already have.We were using translation and prefixes but I think is time to change the DN to 5 or 6 digits length.Somebody knows how can I complet...
Hi Jaime,Thanks for your prompt response.So there is no problem if I restore a DRS backup of a CUC with 2vDisk, into a fresh install with1vDisk? I just want to be sure that my question was clear.Thanks AgainAM
Thanks both of you for your answers.The fact is that the one branch is connected by DMVPN, and the another one is connected by MPLS.So it was a routing problem.When I press the conference softkey the DSP resource can't reach the IP phone.
En otro caso parecido, mencionan que abras dos sessiones (telnet/ssh) en el 3925en la session pones.# service-module sm1/0 sessionCon esto abriras por asi decir la consola de tu SM.En la segunda sesion mandas reinicar con este comando# service-module...
puedes utilizar los sigueintes comandos para ver el estado.service-module SM1/0 status y puedes reinicar el modulo haciendo con este comandoservice-module SM1/0 reloadpregunta, ya reinicaste todo el router?espero sirva shalomAA
