04-14-2015 02:47 PM - edited 03-17-2019 02:39 AM
Hello All
I have a cme 10.5 with 8851 and 8800 sip expansion module in fast track configuration.
I am trying to configure speed dial and blf speed dials. I have 3 lines configured on the 8851 so when I configure the speed dials they start on button 4 onwards. I want to avoid buttons 4 and 5 on the 8851 and start on the expansion module. Can this be achieved?
thanks
Feisal
Solved! Go to Solution.
04-15-2015 06:57 AM
Make a new Phone Button Template and assign it to this phone. On the Phone Button Template assign anything except SD or BLF to lines 4 and 5, then starting on line 6 assign the SD or BLF feature.
To create a Phone Button Template go to Device/Device Settings/Phone Button Template.
04-15-2015 06:57 AM
Make a new Phone Button Template and assign it to this phone. On the Phone Button Template assign anything except SD or BLF to lines 4 and 5, then starting on line 6 assign the SD or BLF feature.
To create a Phone Button Template go to Device/Device Settings/Phone Button Template.
04-16-2015 06:53 AM
Thanks KKoeper 12.
I configured a voice template and button-layout 1-5 line
button 6-14 blf speed dial so the expansion module now list all the blf's I need.
Kind regards
Feisal
12-20-2017 02:51 AM
question was on CME and answer was on CUCM.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide