09-30-2012 07:04 AM - edited 03-16-2019 01:27 PM
Hi,
I have CME 2921 and Slim IP door Phone, I want to configure IP door phone to be integration with CME, anyone know what is the correct configuration which I have to apply it on cme.
regards
09-30-2012 07:08 AM
What type of phone is it? I belive that it may be an analogue phone. You are going to need an analogue adapter lije cisco ATA or a VG200 series gateway. You cant connect analogue phone directly..
Please rate all useful posts
"'Nature is too thin a screen, the glory of the omnipresent God bursts through it everywhere"-Ralph Waldo Emerson
09-30-2012 07:17 AM
Thank you for reply, the IP door phone has RJ45 and intgrat it with CME, no need for ATA, and it using SIP protocol, but I do not know what is the correct configuration that I have to apply it on cme and allow me to open the door through the cisco Phone using some code
09-30-2012 07:29 AM
What is the Model of the phone? What is the full name?
Please rate all useful posts
"'Nature is too thin a screen, the glory of the omnipresent God bursts through it everywhere"-Ralph Waldo Emerson
09-30-2012 09:25 AM
the name is "IP Door Phone IPDP SLIM" with video see picture the like belwo
09-30-2012 09:50 AM
Here is a link that shows how to configure sip 3rd party phones..
Please rate all useful posts
"'Nature is too thin a screen, the glory of the omnipresent God bursts through it everywhere"-Ralph Waldo Emerson
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide