Hi all,
I'm facing the problem, that our SIP provider is sending the wrong number (registration nr.) in the SIP FROM header.
Check my other discussion:
https://supportforums.cisco.com/message/3586648#3586648
Now I'm trying to copy the SIP To: information to From: with sip profile, but somehow it can't copy it.
Here my setup:
Cisco 2821, c2800nm-adventerprisek9_ivs-mz.151-4.M4.bin, CME Version 8.6
voice call send-alert
voice call convert-discpi-to-prog
voice disc-pi-incoming-on
!
voice service voip
no ip address trusted authenticate
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
no supplementary-service sip moved-temporarily
h323
h245 caps mode restricted
sip
asserted-id ppi
!
!
voice class uri TRUNK sip
user-id 0815440096
....
voice class sip-profiles 102
request INVITE sip-header To copy "<sip:(.*)@(.*)>" u01
request INVITE sip-header From modify "<sip:.*@(.*)>" "<sip:\u01@\1>"
....
voice class sip-copylist 1
sip-header To
...
voice translation-rule 1
rule 1 // // plan any unknown
!
voice translation-rule 2
rule 1 // // plan any unknown
!
voice translation-rule 40
rule 2 /\(.*\)/ /0\1/
!
voice translation-rule 190
rule 1 /^0\(.*\)/ /\1/
rule 2 /^9\(.*\)/ /\1/
!
voice translation-rule 191
rule 1 /297/ /0815440097/
rule 2 /296/ /0815440096/
rule 3 /^0\(.*\)/ /\1/
!
voice translation-rule 192
rule 2 /^0815440097/ /297/
rule 3 /^0815440096/ /296/
voice translation-profile TP_IN_SIP
translate calling 40
translate called 192
!
voice translation-profile TP_IN_SIP_1
translate calling 40
translate called 1
!
voice translation-profile TP_OUT_SIP
translate calling 191
translate called 190
! -> INCOMING PEER FROM SIP-PROVIDER to CME
dial-peer voice 2000 voip
description ** SIP TRUNK IN **
b2bua
session protocol sipv2
session target dns:sip12.e-fon.ch
session transport udp
incoming called-number .
incoming uri to TRUNK
voice-class sip profiles 102
voice-class sip copy-list 1
dtmf-relay rtp-nte
codec g711alaw
no vad
!
! -> INCOMING PEER FROM DIAL-PEER 2000 to PHONE
dial-peer voice 2010 voip
description ** MATCH-URI->changes doing here **
translation-profile incoming TP_OUT_SIP
translation-profile outgoing TP_IN_SIP_1
shutdown
destination-pattern 081544009.
b2bua
session protocol sipv2
session target ipv4:192.168.115.1
session transport udp
incoming called-number .
voice-class sip profiles 102
dtmf-relay rtp-nte
codec g711alaw
no vad
!
!
sip-ua
credentials username 0815440096 password 7 xxxx realm sip21.e-fon.ch
keepalive target dns:sip12.e-fon.ch
authentication username 0815440096 password 7 xxxx
no remote-party-id
retry invite 2
retry response 2
retry bye 2
retry register 2
retry options 1
registrar dns:sip12.e-fon.ch expires 60
sip-server dns:sip12.e-fon.ch
Any ideas? Does the copy function works on the CME or do I need a CUBE?
http://tblog.cisco.be/2011/02/17/cube-conditional-sip-profiles/
Thanks,
Norbert
