how to edit lines out of running-config

[Mike Shoop]

I erroneously entered the wrong file name for startup; so, I need to edit/delete some lines out of the startup-config file.

I think the following section of my startup-config...

!

boot-start-marker

boot system flash c2800nm-spservicesk9-mz.124-24.T2.bin

boot system flash

boot system flash:

boot system flash c2800nm-spservicesk9-mz.124.24.15.xz1.bin

boot-end-marker

!

"NEEDS TO BE AS FOLLOWS"

!

boot-start-marker

boot system flashc2800nm-spservicesk9-mz.124.24.15.xz1.bin

boot-end-marker

!

[Chris Deren · Accepted solution]

Enter "no" in front of it, i.e.

no  boot system flash c2800nm-spservicesk9-mz.124-24.T2.bin

HTH,

Chris

[Mike Shoop]

Thank you Chris. I actually knew about the 'no' command but mistakenly thought it was exclusively for turning services off vs. editing script. thanks again for the quick reply and the good information. very grateful!