05-31-2013 03:48 AM - edited 03-16-2019 05:38 PM
We have to change the phone numbers on all phones in a device pool. We have a did range today start with 3228xxxx. This have to be changed to 3270xxxx. Is there a quick way to do this?
Solved! Go to Solution.
05-31-2013 05:45 AM
Hi Aman
The instructions are in the thread I referenced. It's a CLI app, not a gui/windows app.
Aaron
05-31-2013 03:55 AM
Hi Rune
See this thread for my little tool to do this based on an input CSV: https://supportforums.cisco.com/thread/2119442
Regards
Aaron
Please rate if useful....
05-31-2013 04:10 AM
Hi Aaron,
I was just going through the thread and I downloaded the attachment ExtensionRemapDN.zip.But when I click it after unzipping it , black screen opens and closes.
If u could explain the steps on how to get info from call manager and then, run , it would be helpful.
regds,
aman
05-31-2013 05:45 AM
Hi Aman
The instructions are in the thread I referenced. It's a CLI app, not a gui/windows app.
Aaron
06-03-2013 01:25 AM
Hi,
Thanks, This is a greate tool. I have tested i and it worked fine.
Regards
Rune
06-03-2013 01:41 AM
Hi Rune
Glad to hear it.
Please remember to mark questions as 'answered' to help identify useful responses.
Aaron
05-31-2013 12:22 PM
Hi Rune.
To add an option to the great tool that Aaron suggested (+5 P A) you can use BAT exporting all phone detail, modify just DN and use again BAT to update phones with modified info.
After this operation, just remember to delete old unassigned numbers.
HTH
Regards
Carlo
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide