HTTP Allow List Expressway

[Jaco Jacobs]

Hi guys, 

Has anyone successfully managed to upload a .csv file on expressway?

I am trying to add rules to http allow list but the rules do not show on inbound rules. 

Does anyone also have an example of the file they used? 

[Roger Kallberg]

Yes I have done that some time ago. I’m off work for the next three days, so I don’t have access to the file to share with you. If I remember correct I copied the format of the file from the documentation. General advise, make sure you use the correct character for the separator and that you have all columns in the correct order in the header of the file.

[Roger Kallberg]

Have a look at this reference file. https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/expressway/config_guide/X12-6/exwy_b_mra-expressway-deployment-guide/exwy_b_mra-expressway-deployment-guide_appendix_01110.html#reference_215EE95300D8CE61199913669520625C

[Jaco Jacobs]

Hi Roger, 

Thank you for your reply. 

I have followed the instructions and still no change. 

I have attached the files I am using. 

Are you able to see any difference?

[Roger Kallberg]

This is the example header, this does not from what I recall match the header that I used in the past.

Url,ExpectedResult,Deployment,Description,HttpMethod

Your shared file looks to possibly have a different order of the fields and other fields. 

[Roger Kallberg]

This is an example of a line from the file that I've used in the past.

Url,Deployment,HttpMethods,MatchType,Description
http://<FQDN>:80/emapp/EMAppServlet,,,prefix,"EM US F5 LB"

Make sure that you save the file in UTF-8 encoding, I have a vague memory that there was something with this that I encountered when doing this.