cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2290
Views
0
Helpful
1
Replies

HWIC-4B-S/T card - data only - no voice support?

andyhibbert
Level 1
Level 1

I've got an HWIC-4B-S/T card (BRI ISDN) in a Cisco 2901 running as a CME system. IOS version is 15.0(1)M6

The router recognises the card, I can configure the BRI interfaces.

No voice ports can be configured in dial-peers.

No BRI ports are listed in 'show voice port summary'

Have I got a data only BRI ISDN card.

Andy

1 Accepted Solution

Accepted Solutions

barry
Level 7
Level 7

Hi Andy

Unfortunately so. The BRI card supporting voice is

VIC2-2BRI-NT/TETwo-port Voice Interface Card - BRI (NT and TE)

Barry

View solution in original post

1 Reply 1

barry
Level 7
Level 7

Hi Andy

Unfortunately so. The BRI card supporting voice is

VIC2-2BRI-NT/TETwo-port Voice Interface Card - BRI (NT and TE)

Barry