03-19-2013 08:54 AM - edited 03-16-2019 04:20 PM
I'm running CUCM 8.5 and have just converted from Avaya definity. We used "abbreviated dial groups" to allow a group of stations to share the same speed dials numbers.
Is there a way to replicate it in CUCM? I can put the SD buttons on each phone but it is time consuming.
Thanks,
Rew
03-19-2013 09:51 AM
Just create a set of translation patterns everyone can reach and tell them what to dial. You might be able to use the same numbering plan, if you want the SD to appear on the actual phone, there's no no way around that other than to do the config and maintain manually on each phone.
I'd go the TP way, easier and faster.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk
03-26-2013 08:53 AM
It's disappointing that cisco doesn't have a simple answer to this basic feature. I
03-26-2013 08:56 AM
You cannot expect to have a 1:1 parity of features when migrating from one system to another, if you want this to be considered for a future release, engage your AM and submit a PER.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: