IAD2430 Call transfer

[Tomasz Hinz]

Hello.

I've problem during IAD2430 configuration. I configured device with his internal numbers, but when I try to transfer call from one FXS port to another in the same device, call is disconecting.

For example: I call from 503 to 524, call is in progress, pressing flash button (to transfer call) and call immediately disconecting. How is the reason ?

Is IAD2430 can transfer call trough his ports ? Or may mgcp gateway is needed ?

port configuration:

voice-port 2/0
 cptone PL
 timing hookflash-in 600 0
 station-id name Lany Smith
 station-id number 503
 caller-id enable
!
voice-port 2/1
 cptone PL

 timing hookflash-in 600 0
 station-id name Mary Smith
 station-id number 508
 caller-id enable
!
voice-port 2/2
 cptone PL
 timing hookflash-in 600 0
 station-id name Jon Smith
 station-id number 524
 caller-id enable

Please help.

[Nadeem Ahmed]

How is your IAD and ports is being controlled like signalling protocol MGCP/SCCP/H.323 ? Any call-agent involve?

what is the IOS version ?

Regards

Nadeem Ahmed

[Tomasz Hinz]

Actually does not configure any signaling yet. I try check the device and mentioned call transfer between it own FXS ports and then I'm going to connect it to another CME.

Device working now self without any call-agent. Finally it will be connected with CME 8.6

IOS ver. c2430-ik9o3s-mz.124-10a.bin