cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
363
Views
0
Helpful
1
Replies

Inbound calls w/ block CID show up as coming from 911

kylebrogers
Level 4
Level 4

The gateway is an H323 gateway.  We've done some testing and this only happens when a person's CID is blocked (we used *67 to block it).  When the call comes in with caller ID info, the ANI is correct.  Here is an example debug (with caller ID blocked) and the corresponding dial peer:

-----------------------------------------------------

dial-peer voice 911 pots

destination-pattern 911

incoming called-number .

no digit-strip

-----------------------------------------------------

Mar 21 20:47:40.873: //-1/68360B788D7F/CCAPI/cc_api_display_ie_subfields:

   cc_api_call_setup_ind_common:

   cisco-username=

   ----- ccCallInfo IE subfields -----

   cisco-ani=    !!!!!!!!  It looks like no ANI comes in from the provider so I don't think it's a provider issue  !!!!!!

   cisco-anitype=2

   cisco-aniplan=1

   cisco-anipi=1

   cisco-anisi=3

   dest=3270

   cisco-desttype=4

   cisco-destplan=1

   cisco-rdie=FFFFFFFF

   cisco-rdn=

   cisco-rdntype=-1

   cisco-rdnplan=-1

   cisco-rdnpi=-1

   cisco-rdnsi=-1

   cisco-redirectreason=-1   fwd_final_type =0

   final_redirectNumber =

   hunt_group_timeout =0

Mar 21 20:47:40.873: //-1/68360B788D7F/CCAPI/cc_api_call_setup_ind_common:

   Interface=0x2B99A1D4, Call Info(

   Calling Number= !!!! Again there is no ANI !!!!!!!,(Calling Name=)(TON=National, NPI=ISDN, Screening=Network, Presentation=Restricted),

   Called Number=3270(TON=Subscriber, NPI=ISDN),

   Calling Translated=FALSE, Subscriber Type Str=RegularLine, FinalDestinationFlag=TRUE,

   Incoming Dial-peer=911  !!!!!! Picks the DP tagged 911 !!!!!!!! , Progress Indication=NULL(0), Calling IE Present=TRUE,

   Source Trkgrp Route Label=, Target Trkgrp Route Label=, CLID Transparent=FALSE), Call Id=-1

Mar 21 20:47:40.873: //-1/68360B788D7F/CCAPI/ccCheckClipClir:

   In: Calling Number=911  !!!!!!!!!! Now alll of the sudden, the ANI is 911 !!!!!!!!!!!!!!!(TON=National, NPI=ISDN, Screening=Network, Presentation=Restricted)

Mar 21 20:47:40.873: //-1/68360B788D7F/CCAPI/ccCheckClipClir:

   Out: Calling Number=911(TON=National, NPI=ISDN, Screening=Network, Presentation=Restricted)

Mar 21 20:47:40.873: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:

Mar 21 20:47:40.873: :cc_get_feature_vsa malloc success

Mar 21 20:47:40.873: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:

Mar 21 20:47:40.873:  cc_get_feature_vsa count is 3

Mar 21 20:47:40.873: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:

Mar 21 20:47:40.873: :FEATURE_VSA attributes are: feature_name:0,feature_time:813908120,feature_id:64531

Mar 21 20:47:40.873: //64528/68360B788D7F/CCAPI/cc_api_call_setup_ind_common:

   Set Up Event Sent;

   Call Info(Calling Number=911(TON=National, NPI=ISDN, Screening=Network, Presentation=Restricted),

   Called Number=3270(TON=Subscriber, NPI=ISDN))

Mar 21 20:47:40.873: //64528/68360B788D7F/CCAPI/cc_process_call_setup_ind:

   Event=0x2B966330

Mar 21 20:47:40.873: //-1/xxxxxxxxxxxx/CCAPI/cc_setupind_match_search:

   Try with the demoted called number 3270

Mar 21 20:47:40.873: //64528/68360B788D7F/CCAPI/ccCallSetContext:

   Context=0x2C17DA0C

1 Reply 1

paolo bevilacqua
Hall of Fame
Hall of Fame

You should match have se[pareta DP to match icoming calls, with "incoming called number .".