Buy or Renew
Buy or Renew
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
316
Views
0
Helpful
3
Replies

incoming Call forwarding to Cell

fahad.tariq11
Level 1
Level 1

‎04-13-2016 01:55 AM - edited ‎03-17-2019 06:33 AM

Hi guys How are you hope you are doing great ! I am  in bit of a trouble here . In mo organization  Call forwarding works fine internally but when someone calls from outside i mean incoming calls are not being forwarded and intend clients complain of fast busy
here is what i mean to say  by my above statement when someone calls EXT 7924 and when  call is unanswered  it autocratically goes to cell and at the other hand when someone calls from outside on this EXT from EUI164  call forwrd to cell fails we are using SIP trunk in our ORG
thanks in advance        

Labels:
0 Helpful
3 Replies 3

Manish Gogna
Cisco Employee
Cisco Employee

‎04-13-2016 02:10 AM

Can you check on the directory number configuration page if any Calling Search Space is applied to the 'Forward No Answer External" field. It should be able to access the partition through which call is being forwarded to gateway/cube. You can also check by running a debug on the gateway if the call is reaching the gateway or not.

Manish

0 Helpful

fahad.tariq11
Level 1
Level 1
In response to Manish Gogna

‎04-13-2016 02:15 AM

@Manish   we are using CME  not CUCM

0 Helpful

Manish Gogna
Cisco Employee
Cisco Employee
In response to fahad.tariq11

‎04-13-2016 02:18 AM

Try mentioning the call control software in the initial description, for CME you may check the following

http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-communications-manager-express/82046-cfwdcme-ext-num-fails.html#topic1

Manish

0 Helpful
Customers Also Viewed These Support Documents