Call Flow
ISDN E1 >VG/CME
We have an ISR 4331 with CME capabilities, the IP of the ISR 4331 is 192.168.4.1 which is also the IP of the CME. SIP Phones are successfully registered on CME.
Question is how Can I route the DID call to one of the IP Phones.
I already tried the below configuration however it is not working
voice translation-rule 100
rule 1 /9760961/ /8000/
!
!
voice translation-profile DID
translate called 100
!
dial-peer voice 1000 pots
incoming called-number .
direct-inward-dial
!
dial-peer voice 2000 voip
translation-profile outgoing DID
destination-pattern 9760961
session target ipv4:192.168.4.1
The ISDN Number is 9760961 while the Extension Number of the Cisco SIP 3905 Phone is 8000. I just want to route the 9760961(PSTN Number) to extension 8000.
