09-17-2012 11:14 PM - edited 03-16-2019 01:15 PM
Hi,
Please help to integrate Siemens HiPath 3000 EPABX with CUCM 8.5 using MGCP Qsig on E1, I have gone through Cisco Documentation which does not talk about Siemens HiPath 3000.
Please help.
Rgds.....Navinder.
09-17-2012 11:31 PM
What is your actual problem ?
09-17-2012 11:35 PM
Hi Paolo,
Thank you for the promp reply.
When I try to integrate Voice Gateway using MGCP QSIG, it does not get registed with CUCM 8.5.
Regards,
Navinder.
09-17-2012 11:46 PM
If the VG does not register that has nothing to do with QSIG, rather something wrong in config somewhere.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide