04-04-2013 08:15 AM - edited 03-16-2019 04:37 PM
Hello!
My company is trying to implement certain security measures for our building. We have a speaker system in place already throughout the building.
I know there is a way to use a Valcom paging system in conjunction with call manager as I've seen one setup before. But I am curious if there's a way in call manager to set it up where someone picks up a phone, dials a number/code, and it then links them to the speaker on the IP Phones in the building where they can make an announcement.
Is this even possible? Any info is greatly appreciated.
Thanks!
04-04-2013 09:12 AM
James,
CUCM 9.1 now has support for one to many paging just as you described.
If you are running an older CUCM version you need to integrate with
3rd party application/kit like SINGLEWIRE (Formerly BERBEE) etc
Regards,
Alex.
Please rate useful posts.
04-04-2013 09:14 AM
You need to look at paging solution, with version 9 you get it for free for up to 50 phones in paging group.
Chris
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide