ā11-22-2012 11:34 AM - edited ā03-16-2019 02:20 PM
I have 10 digit DN's, I am trying to configure 3 digit internal dial translations, when in SRST mode.
e.g. phone registered as 123-4567-890 and someone internally dial as 890 it should go through...
I have tried to configure translation rules and tested it worked as expected. However when I applied it globally it didn't work.
I am missing some thread here or applying it incorrectly.
Rule:
voice translation-rule 5
rule 1 /^8..$/ /1234567&/
Profile
voice translation-profile internal1
translate called 5
Applied globally:
voip-incoming translation-profile internal1
Thanks!
Solved! Go to Solution.
ā11-22-2012 12:27 PM
Sky
Unhook your translation profile and try this instead
!
call-manager-fallback
dialplan-pattern 1 12345678.. extension-length 3 extension-pattern 8..
!
Now when in srst 806 is dialled it will call the registered dn 1234567806
Regards,
Alex.
Please rate useful posts.
ā11-22-2012 12:27 PM
Sky
Unhook your translation profile and try this instead
!
call-manager-fallback
dialplan-pattern 1 12345678.. extension-length 3 extension-pattern 8..
!
Now when in srst 806 is dialled it will call the registered dn 1234567806
Regards,
Alex.
Please rate useful posts.
ā11-22-2012 01:49 PM
Hi Alex,
Great! +5 for this one.
I recollect I used the similar pattern in CME under telephony-service. However was unaware of such option in SRST.
Great help.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: