IP phone 7975 Unprosisioned for issabel

[waleed easyvision]

[Maren Mahoney]

A few questions: 

• What version of CUCM are you running? (Or are you running CUCME?)
• Is the phone provisioned by MAC in CUCM? (Presumably yes, but checking.)
• If the phone is provisioned in CUCM and is a SIP phone, is a directory number configured on the phone?
• What does the Status Messages read on the phone? Can the phone reach the DHCP server? The TFTP server? Does it ask for XMLDefault.cnf.xml?
• Has the phone received the correct VLAN from the switch, and does the DHCP Pool for that VLAN have the required information?

Let us know so we can better help.

Maren

[waleed easyvision]

I have Issabel 4.0.0-9  , How can i checking that ( Is the phone provisioned by MAC in CUCM) ,  If the phone is provisioned in CUCM and is a SIP phone, is a directory number configured on the phone  No ,  

status Massage 

10:41:28a File Not Found : ram/SEP0024142DD25B.cnf.xml
	10:41:28a File Not Found : SEP0024142DD25B.cnf.xml
	10:41:28a XMLDefault.cnf.xml
	10:42:04a No IPv4 DNS Server
	10:42:04a No IPv6 DNS Server
	10:42:04a No IPv6 TFTP Server
	10:42:04a No Trust List Installed
	10:42:05a File Not Found : ram/SEP0024142DD25B.cnf.xml
	10:42:05a File Not Found : SEP0024142DD25B.cnf.xml
	10:42:05a XMLDefault.cnf.xml

• Has the phone received the correct VLAN from the switch, and does the DHCP Pool for that VLAN have the required information? Native Vlan 

[M02@rt37]

Hello @waleed easyvision ;

Cisco router CME or CUCM as call center ? Which Firmware ? SIP or SCCP ?

Do you debug TFTP events to see the issue ? Do you have log on phone ?

[waleed easyvision]

I have Issabel 4.0.0-9 , VM , Firmware 9.2.1 , SIP  , No debug TFTP Event appear , No I don't  

[Roger Kallberg]

As you seem to use a 3:rd party calling system, Issabel 4.0.0-9 from what you wrote, this forum is not the appropriate place to ask for help. If you do use a Cisco calling system, like Communication Manager (CM) or Commutation Manager Express (CME), then we can help you with your questions.

[Maren Mahoney]

In addition to what @Roger Kallberg said, the firmware on a Cisco 7975 phone will use Cisco proprietary signaling to connect to CUCM. Unless Issabel accepts this signaling natively you will not get the Cisco phone to register to Issabel. However, there is a SIP-Only (basic SIP functionality) version of the 7975 firmware that might allow it to register as a simple SIP device but I don't think that firmware is still available for download from Cisco's website.

Maren

[waleed easyvision · Accepted solution]

Dears hope you are  will 
i  solved my  problem and make integration  with issabel  the issue was in xml  file       

[M02@rt37]

Perfect @waleed easyvision  

Thanks for your feedback.

[dongitechconseil]

Hey You solved your probleme can you share solution i've cisco 8851 and i cant apply mpp the tftp server return could not open requested file for reading how you solve it 

[waleed easyvision]

i was  have  problem for  xml  file    (auth Password , IP for server  ) 
so  can  you say more information about your problem