IPhone Jabber 11.0 with CME

[Marc El Achkar]

Hello,

Is there a way to make jabber 11.0 on iPhone to work with CME and how?

Best regard

Mark

[Vivek Batra]

AFAIK Jabber 9.x is the highest version supported on CME 10.5. 

On which version of CME you're?

[Carlo Poggiarelli]

HI Mark.

Unfortunately jabber for IPhone and Android are not yet supported on CUCME.

There was a Jabber Voice application for both platform that worked (and still works) with CUCME...

unfortunately it has been removed from app store and Play Store.

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/requirements/guide/cme105spc.html

HTH

Regards

Carlo

[Vivek Batra]

Hi Carlo,

After your comments, I also noticed the same. Do you mean Jabber on mobile platform is still supported with CME but not available on respective market for download?

Thanks

[Carlo Poggiarelli]

Hi Vivek.

Correct...

Jabber Voice is still an option on CME 10.5 as voice register pool type but not downloadable from any store.

Cheers

Carlo

[Marc El Achkar]

Hello guys,

the problem is also with ios 9 on iphones released few days ago, the jabber voice also stopped working, i was wonderinbif there is a way to make the jabber app to work with cucme or is there any 3rd party app we can use?

[Carlo Poggiarelli]

Hi Marc.

I just checked and you are right, with IOS9 it stopped working :(

Have you tried 3CX phone?

Let me know

Cheers

Carlo

[Marc El Achkar]

Ok for the CME I tested a 3rd party softphone for IPhone named Join and for Android I used CSIPSimple and they are working fine.

For CUCM I tested the Jabber Phone only mode and its working.

Best regards

Mark Achkar

[Fabio Henrique Teixeira]

Marc,

I am passing for the same issue of the topic. I saw that you are using the Join SIP Client for Iphone and it works fine! I have tried the to use this software with CME but I didn´t have success. Please you share your configs of CME and the options used on Join SIP Client?

Best Regards,

Fábio Henrique 

[Carlo Poggiarelli]

Hi Fabio.

Here what you need.

******CME SIDE*******

voice register global

source-address x.x.x.x port 5060 (x.x.x.x is your router interface ip address)

max-dn 10

max-pool 5
authenticate register
authenticate realm all
tftp-path flash:
file text
create profile
voice register dn 1
number 5220
allow watch
name Your displayed name 
label line name

voice register pool 1
id mac 0000.1234.5678
number 1 dn 1
presence call-list
dtmf-relay rtp-nte
username cisco password cisco
no call-waiting
codec g711ulaw

*******Join Client Side*****

Username:5220

password:cisco

Auth. Unsername: cisco

Display Name:5220

Domain: Your router IP Address 

Port: leave unchanged 

Hope this helps 

Regards

Carlo

[Fabio Henrique Teixeira]

Thanks Carlo,

Its now registering, but I am seeing some errors to make externals calls. But internals calls is the most important at this momment for me.

Thank you very much!

[Carlo Poggiarelli]

Glad That Helped :)

You can post the output of a debug ccsip message while calling outbound so I can help you further.

Please rate useful posts and mark as answered the one that solves your issue.

That will help others with same problem

Thanks

Regards

Carlo