IP Telephony and Phones

We have DX650 Phone registered with CUCM 10.5.2 . User have forgotten his screen lock password. When we click the forgot/Reset password button we are shown up with two option to reset by givining google user id and password OR by CUCM user id or pass...

Hi, Is it possible to have more than two dn  in 7941 phone ? Thank you 

HI every one, I have a 7942 all light on and showing blank screen I checked DHCP server , phone didn't get any IP Please guide me Thankx & Regards Sayed

I want to set a greeting message to a directory number in CUCM10.5 1.All calls should be first greeted with a welcome message and should start ringing on reception number. 2.If no one answered the call , it then goes to a voice message. Can anyone...

Attempting to integrate a Cisco 2951 to a Nortel MG1010 via Q.SIG PRI.  When watching the layer 2 debugs, all I see is the Cisco GW sending SABMEs but never receving anything.  Nortel side supposedly sees the same, only sending, never receiving (anot...

Hi, I have 12x 7962 Phones which need to be configured exactly the same. They have exactly the same buttons and features and we use 6x shared lines which are different numbers but the same on each phone ie the phones/lines are exactly identical on ea...

HELP PLEASE We are trying to Register the New “Cisco IP Phones CP-8945” But We are having some trouble with it. in a CME Version 9.1We got about 150 new Phones and for the looks of it all the ones I´ve get out of the box the --> """Initial App Load I...

Hi Experts, I am facing an issue of IVR not accepting digits once dialed through SIP trunk. SIP DID range 28354XX I tried to troubleshoot with ITSP as below. First reply from ITSP These traces are collected by ITSP. Calling number 2835485 in unsucce...

Hello, I changed in our customer  implementation the service parameter Local route group for redirected calls to  Local route group of original called, to solve the known issue with calls to forwarded numbers to mobile from another location going out...

Dear All Kindly i have an issue with enable srst it is not work , we try to enable SRST in router 2901 and router license is  License Type: EvalRightToUseLicense State: Active, In UseEvaluation total period: 8 weeks 4 daysEvaluation period left: 8 w...

Hello all, I'm converting some Cisco 8945 refurbs from SIP back to SCCP using the auto registration method in CUCM. The problem is that after the phone downloads the SCCP firmware and reboots, it freezes when attempting to register. When the auto reg...

Hi All, I am building CUCM from scratch with 1000users. They would like to retain their existing extension numbers from their old PABX system. Initial roll out of ip phones i am doing auto-registration. Is there a way to input directory number/Prima...

Hello,  CUCM PUB /CUCM SUB/ IMP PUB /IMP SUB all at release 10.5.2 Let me tell you that I followed the cisco process for CUCM and IM & P I have the following error when checking the enable High Availblity in the CUCM Pub/System/Presence Redundancy Gr...