Is MPE 2.0.3.35 compatible with CUCM 9.1.2?

[Pieter de jong]

Guide says only to 6.1 but wondering if H323 would still work?

[Joseph Martini · Accepted solution]

You are correct that it should still work since it is just H323, however since the guide says 6.1 it hasn't been tested.

[Jonathan Schulenberg]

Well, it's H.323 and AXL. The most likely problem that would arrise is the AXL schema that MPE knows has been deprecated (they only maintain two revisions backward). We have a project that, in theory, is going to find out if this will break in about two weeks. If I remember, I'll post a follow-up with what happens but I would work under the assumption that AXL will break until someone proves otherwise.

Please remember to rate helpful responses and identify helpful or correct answers.

[Pieter de jong]

Cheers Jonathan!

In my project I am replacing with WebEx onpremise solution but was just wondering for backout plans. I may also find out in the next week or so and will post findings.

Cheers

[Pieter de jong]

Hi Jonathan,

As it turns out my server hardware is DOA for CWMS and looks like I will need to keep MPE 1.5 and CUCM 9.1.2. Did you manage this in your environmnet yet?

Cheers

Pieter