04-11-2007 06:33 AM - edited 03-14-2019 08:56 PM
Hi i have Cisco 2811 router with VIC2-2BRI NT/TE module i want to connect it to NT provided by telco, can anybody provide me with configuration example. Thanks in advance.
04-11-2007 06:38 AM
For which purpose? Callmanager, CME, generic H.323 / SIP ? Which country / switch type ?
You can anyway search for basics of configuration on CCO with "configuring ISDN BRI"
Hope this helps, if so please rate post!
04-11-2007 06:49 AM
Hi Shen,
Just to add a note to Paolo's good info, here is an excellent doc that shows some good diagrams, cable pinouts and sample configs;
Configuring Network Side ISDN BRI Voice Interface Cards
Hope this helps!
Rob
04-11-2007 06:52 AM
Rob that is a great doc, but let's hope that "04429..." doesn't end with a crossed cable to the NT and trying to power it! :)))
04-11-2007 10:37 PM
I think that i have done it before you write your comment here :(
04-12-2007 02:10 AM
Nothing bad should happen.
Now, when you plug isdn into console port, that's another story :)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide