Limit calls to a DID on a PRI with CME

[johnivey]

Hello all,

Apparently I like acronyms :-).  Here are my specs and my issue:

CME 9.5

Full PRI

My problem is I have a call coming into the PRI, say, 555-555-5555.  I only want this number to be called three times before getting a busy signal.  I have found no way to do this.  I have the incoming number translated to a hunt group of ten phones, however, I only want three calls maximum to enter the hunt group.  I don't want people to have to login to a hunt group or do any manual procedures.

Thanks
John

[Dennis Mink]

TRy configuring RNA:

CME(config-ephone-dn)#call-forward noan 5555555 ?

  timeout  Ringing no answer timeout duration

=============================
Please remember to rate useful posts, by clicking on the stars below.

=============================

[abidnazeer · Accepted solution]

Try pn the ephones in huntgroups

max-calls-per-button 3

busy-trigger-per-button 3