01-08-2009 06:10 PM - edited 03-15-2019 03:24 PM
A video conference created manually in the MCU Interface 3515MCU, should be reflected as a endpoint in the Gatekeeper (with the command show gatekeeper endpoint specifically with the e.164ID) ?
The MCU is registered in the Gatekeeper
01-08-2009 10:33 PM
yes, whats the output for show gatekeeper endpoints?
If it is registered yes...
01-09-2009 06:14 AM
The register a MCU in Gatekeeper is:
GK_STGO01#show gatekeeper endpoints
GATEKEEPER ENDPOINT REGISTRATION
================================
CallSignalAddr Port RASSignalAddr Port Zone Name Type Flags
--------------- ----- --------------- ----- --------- ---- -----
172.16.2.2 59971 172.16.2.2 32839 CUCM_STGO VOIP-GW
H323-ID: Trunk_GK_STGO01_1
Voice Capacity Max.= Avail.= Current.= 2
172.17.1.2 1720 172.17.1.2 1719 CUCM_STGO MCU
H323-ID: MCU_STGO01-172017001002
E164-ID: 72
E164-ID: 85
E164-ID: 84
E164-ID: 80
E164-ID: 81
Regards
01-09-2009 07:20 AM
For example, if I create a new conference through of the Web administration of the MCU. With a Prefix and Unique Number of 81(ServicePrefix) and 555(UniqueNumber), the new number formed 81555, should be displayed as a result of the command show gatekeeper endpoints?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide