11-25-2013 11:02 PM - edited 03-16-2019 08:35 PM
Hi,
I need some clarifications regarding media resources. when we add hardware media resources in gateway we define below profiles. Whats the max session do in trancoding profile, in conference and in mtp profiles.
dspfarm profile 2 transcode
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
maximum sessions 6
associate application SCCP
!
dspfarm profile 1 conference
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
codec g729r8
codec g729br8
maximum sessions 2
associate application SCCP
!
dspfarm profile 3 mtp
codec g711ulaw
maximum sessions software 10
associate application SCCP
11-25-2013 11:20 PM
How many of each you can have at the same time, you use the command lookup tool to find what a command does
Sent from Cisco Technical Support iPad App
11-25-2013 11:41 PM
it shows nothing as attached jpg
11-26-2013 12:23 AM
The maximum sessions is used to define the total number of sessions for each dspfarm profile. This value depends on a variety of factors such as the amount of provisioned on the router,the amount of DSP available on the router and the codec complexity defined or configured for each DSP. Please read this document I created on the support community for a better understanding of how this works
https://supportforums.cisco.com/docs/DOC-29164
Please rate all useful posts
"opportunity is a haughty goddess who waste no time with those who are unprepared"
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide