Hi Guys,
The gateway of my customer is presenting locked the voice-port. I found the message below and would like know if this problem can be relationship about my problem. If don´t have I believe that this is problem too.
OURCUCME01#sh voice dsp group slot 0
dsp 1:
State: UP, firmware: 26.8.0
Max signal/voice channel: 16/16
Max credits: 240
num_of_sig_chnls_allocated: 6
Transcoding channels allocated: 0
Group: FLEX_GROUP_VOICE, complexity: FLEX
Shared credits: 210, reserved credits: 0
Signaling channels allocated: 6
Voice channels allocated: 1
Credits used: 30
Voice channels:
Ch02: voice port: 0/0/2, codec: g729br8, credits allocated: 30
dsp 2:
State: UP, firmware: 26.8.0
Max signal/voice channel: 16/16
Max credits: 240
num_of_sig_chnls_allocated: 0
Transcoding channels allocated: 0
Group: FLEX_GROUP_CONF, complexity: CONFERENCE
Shared credits: 0, reserved credits: 240
Codec: CONF_G729, maximum participants: 8
Sessions per dsp: 2
dsp 5:
State: UP, firmware: 26.8.0
Max signal/voice channel: 16/16
Max credits: 240
num_of_sig_chnls_allocated: 0
Transcoding channels allocated: 0
Group: FLEX_GROUP_CONF, complexity: CONFERENCE
Shared credits: 0, reserved credits: 240
Codec: CONF_G729, maximum participants: 8
Sessions per dsp: 2
dsp 6:
State: UP, firmware: 26.8.0
Max signal/voice channel: 16/16
Max credits: 240
num_of_sig_chnls_allocated: 0
Transcoding channels allocated: 0
Group: FLEX_GROUP_CONF, complexity: CONFERENCE
Shared credits: 0, reserved credits: 240
Codec: CONF_G729, maximum participants: 8
Sessions per dsp: 2
The dsp 1 is showing the different configuration about another DSP. Any have idea what solve this problem?
Thanks,
Wilson
