Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Can someone please tell me the detailed call-flow of MWI ? How it integrates between CCM & Unity? My main doubt is - after someone leaves a VM, how does Unity tell CCM that a message has arrived? I think CCM has to dial the MWI ON # to turn on MWI...
Is it possible to route a call based on it's ANI(calling number)? I know I can manipulate the digits, but that's not what I am looking for. As an example, I get a call from 555, I want it routed to specific extension or voice port regardless of the...
I've got a UC520 with 4 line ISDN inward only one number on all the lines. I want a hunt group 5001 to ring when one of the BRI is called. Can someone help me out
Hi,I have a big trouble with a 7911 IP Phone. First, I load to the 7911 the SIP image for this series of IP Phones from cisco.com. With this I have no problem.Then I want to register the 7911 again with my CCME to work with SCCP, so I did a factory r...
I have deployed a CALL MANAGER EXPRESS at a client, but I have a problem transcoding sda. Here is the problem:The customer has a slice of external numbers (sda) from 338890820 to 338890850 with the head of line 338890820 AND extensions as 1820 to 185...
I need to change NTP servers on my CCM5.13 install and cannot find where to do it. Anyone know off hand?Thanks AheadTodd
Hi all, i'm wondering when i'm using AA, if someone dial my company number and get the AA script that invite him to dial by extension so he could reach the international number just by typing the Outside extension and if it's possible how can i cont...
Hi all,When calls come into an FXO port on a MGCP controlled 2821 they are routed over the WAN to an auto attendant on a Unity box. The auto attendant speech is very choppy. QoS best practices are properly set and I have played with input gain/output...
Our 3845 SBC with:C3845-IPVOICE_IVS-M 12.4(11)XWclose abnormaly the calls from Asterisk platform with the message in the title.Anybody hear something about ?Best Regardsluciano
I recently changed from a 6608 card in my 6509 to a 2811 router for incoming/outgoing voip calls. Once the new router was inplace, incoming calls were no longer displaying the caller name. Number only. I am running Cisco Call Manager 3.3(4) and with ...
Hello,I have encountered today a very strange situation: I connected a 7940 phone to my desk switch (it's a lousy Surecom switch, with no VLANs or other stuff) and that switch is connected to another switch - and from there, to the company's routing ...
I have a ICT to another cluster which I wish to set the calls to use g729 across this linkSet up Cluster A - phones A ICT to Cluster B phones BCalls within Cluster A use G711Calls within Cluster B use G711Between clusters i.e over the ICT need to us...
Does any of the Cisco IP telephone sets or the CCMs support IPV6 ?
Dear Sir,I have Dell Poweredge 2850 Server with 2GB RAM, 3.0 GHZ Dual Processor, 140 GB Hard Disc. Is it possible to install CCM 4.1 on it or do I need MCS. Please guide me regarding this.
I have a customer with callmgr 5.1. remote gateway is t-1 cas h323 2821. telco says they are passing inc caller id but we don't see it on phones. all inc calls go through unity aa before hitting phone.are there any special configs i need on gateway t...
