We are moving away from a front end nortel system with a back end call manager to full call manager. Part of this migration involves us moving from the nortel analog lines to a VG248 gateway. The way that the nortel connects to to various floors is via a cross connection from a 110 block that is tied to the Nortel backplane with an amphenol cable. That 110 block is then crossconnected to another punch down block that ties to a feed to the floor where each connection is patched out where it is needed.
My question is, can I move the amphenol connection from the backplane of the nortel option 11 phone system to the VG248 and cross connect to from the same 110 block to the 110 block connected to the floors, just as I did with the nortel?
Sorry for the novel, I know its confusing. Anyone have experience with this?
Please let me know.
Thank you.
Vicky