02-20-2014 07:45 PM - edited 03-16-2019 09:50 PM
G'Day,
I am just wandering the it's possible to modify/edit the primary line display of Cisco IP Phone 7942.
Like to display called-id or any name or description instead on the default primary number.
Thanks,
Solved! Go to Solution.
02-21-2014 05:45 AM
This cannot be alphanumeric on CUCM. It is the DN unless you have specified an External Phone Number Mask on the DN, in which case that field gets displayed.
Please remember to rate helpful responses and identify helpful or correct answers.
02-20-2014 11:21 PM
Hi Noel
1) Go to the phone in CUCM
2)Click on line 1
3)search for "Line Text Label" =BOB
ASCII Line Text Label= BOB
i guess your good to go
02-21-2014 12:25 AM
G'Day, Rakesh.
Thanks for your time.
However, this only changes the line text label not the primary line display.
Even if you put something on the line text label of your primary DN like BOB. The primary line display still displays 1111.
Regards,
Noel
02-21-2014 05:45 AM
This cannot be alphanumeric on CUCM. It is the DN unless you have specified an External Phone Number Mask on the DN, in which case that field gets displayed.
Please remember to rate helpful responses and identify helpful or correct answers.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide