11-30-2021 12:07 PM
I am looking for confirmation of the multiplatform software on this ATA so it can register to the control hub. My question is to confirm what firmware included or do I need to upgrade it to the MPP firmware?
Solved! Go to Solution.
11-30-2021 04:47 PM
Its a MPP version ATA and if not converted to Enterprise version, ATA192-3PW-K9 will be running MPP firmware. Power the device and check the firmware.
Even if it running an Enterprise versions, There is an option to convert to MPP versions before adding the device to Control Hub. AFAIK its free of charge..
11-30-2021 01:03 PM
Hi,
Check here:
11-30-2021 04:47 PM
Its a MPP version ATA and if not converted to Enterprise version, ATA192-3PW-K9 will be running MPP firmware. Power the device and check the firmware.
Even if it running an Enterprise versions, There is an option to convert to MPP versions before adding the device to Control Hub. AFAIK its free of charge..
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide