09-16-2015 09:36 AM - edited 03-17-2019 04:19 AM
Is it possible to create a DN in Call MAnager that would allow you to broadcast a message to multiple phones, making them go off-hook and have the message broadcast out their speakers. The idea being emergency message broadcasts throughout an office/building. It seems like this functionality used to have to rely on third party programs, but now I'm reading that some of that functionality has been integrated into Call Manager natively.
Is this now possible, and which versions support it if so?
Solved! Go to Solution.
09-16-2015 10:07 AM
Hi there,
There is no way to dial a DN that would auto answer (on speaker) on multiple phones, but starting with the release of CUCM 9.1 there is a built-in package for Informacast paging as shown below;
Now included with Unified Communications Manager is the Singlewire InformaCast product that provides paging capabilities for users to make point-to-point, or group pages, to and from Cisco IP Phones. The software and documentation for the InformaCast product is on a separate DVD included with the purchase of Unified Communications Manager. It is also available online as a software download on cisco.com.
The InformaCast product is divided into two categories, basic and advanced functionality. The basic paging features allow paging between Cisco IP Phones to groups and zones that the administrator configures. An unlimited number of groups is possible but with a maximum of 50 users total in each group in basic paging. Basic paging is provided as a new Unified Communications Manager feature at no cost. If there is a requirement for more than 50 users in a single group or for higher level capabilities, the advanced features of InformaCast are required and are highly recommended.
The advanced features of InformaCast include:
Paging and Emergency Notification to All Users
Paging to Overhead Analog and IP Speakers
Bell Scheduling
Prioritizing Emergency Notifications with Call Barge Option
Pre-Recorded and Text only pages
Integration with Social Media Sites for Notification
Email and SMS Mass Notification
Call Number Monitoring - 911 Alerting
Integration with Jabber clients
There are numerous additional features of Advanced Paging. To determine if Advanced Paging/Notification is appropriate for the end user's Unified Communications Manager deployment, there is a 60 day trial of the advanced functionality to evaluate the higher level features. After installation of the software, there is an option to begin the demonstration period for full access to all capabilities. To retain Advanced Functionality after trial or if this functionality is required at the time of the Unified Communications Manager purchase, the Advanced Paging/Notification functionality can be purchased as a perpetual license from SolutionsPlus or as a subscription directly from Singlewire. For more information on the product's capabilities or for sales questions, contact Singlewire or refer to the documentation and support information included with the product.
From;
Cheers!
Rob
09-16-2015 10:07 AM
Hi there,
There is no way to dial a DN that would auto answer (on speaker) on multiple phones, but starting with the release of CUCM 9.1 there is a built-in package for Informacast paging as shown below;
Now included with Unified Communications Manager is the Singlewire InformaCast product that provides paging capabilities for users to make point-to-point, or group pages, to and from Cisco IP Phones. The software and documentation for the InformaCast product is on a separate DVD included with the purchase of Unified Communications Manager. It is also available online as a software download on cisco.com.
The InformaCast product is divided into two categories, basic and advanced functionality. The basic paging features allow paging between Cisco IP Phones to groups and zones that the administrator configures. An unlimited number of groups is possible but with a maximum of 50 users total in each group in basic paging. Basic paging is provided as a new Unified Communications Manager feature at no cost. If there is a requirement for more than 50 users in a single group or for higher level capabilities, the advanced features of InformaCast are required and are highly recommended.
The advanced features of InformaCast include:
Paging and Emergency Notification to All Users
Paging to Overhead Analog and IP Speakers
Bell Scheduling
Prioritizing Emergency Notifications with Call Barge Option
Pre-Recorded and Text only pages
Integration with Social Media Sites for Notification
Email and SMS Mass Notification
Call Number Monitoring - 911 Alerting
Integration with Jabber clients
There are numerous additional features of Advanced Paging. To determine if Advanced Paging/Notification is appropriate for the end user's Unified Communications Manager deployment, there is a 60 day trial of the advanced functionality to evaluate the higher level features. After installation of the software, there is an option to begin the demonstration period for full access to all capabilities. To retain Advanced Functionality after trial or if this functionality is required at the time of the Unified Communications Manager purchase, the Advanced Paging/Notification functionality can be purchased as a perpetual license from SolutionsPlus or as a subscription directly from Singlewire. For more information on the product's capabilities or for sales questions, contact Singlewire or refer to the documentation and support information included with the product.
From;
Cheers!
Rob
09-16-2015 10:21 AM
Thanks for the information. To clarify, exactly what is meant by "Paging and Emergency Notification to All Users"? How is that given out exactly?
09-16-2015 11:35 AM
Hi there,
The "basic" package is phone to phone audio notification via the speakers on an IP phone. The "advanced' package includes the above along with text to phone, SMS, overhead paging system, digital signage, desktop, jabber pop-up etc. etc.
Cheers!
Rob
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide