04-02-2012 09:32 AM - edited 03-16-2019 10:25 AM
Dears ,
I received from service provider ONE Access 1424 device for new 200 lines , i want to connect
this device to working network . I have 2801 gateway and CUCM 6.1 server connected to Multilayer switch
4500 series .
Please i need the steps or links to connect this device .
Best Regards ,
04-02-2012 10:09 AM
Since that is not a Cisco product, why are you asking here ?
04-02-2012 05:04 PM
Dear ,
The configuration for this device it is from service provider . But how can i connect this device to
the voice gateway 2801 and CUCM 6.1 , and what the configuration can i configure in voice gateway
and CUCM 6.1. Service provider give the device with SIP trunk configuration .
BestRegards ,
04-02-2012 07:04 PM
Hassan,
unsure what that 1424 device is, but you will have to work with your provider to build either:
a-a SIP Trunk from CUCM to the 1424
b:a SIP dial peer from your Cisco 2800 to the 1424 (and subsequently a pattern from your CUCM to your 2800)
I assume your provider gave you details on how to configure it in terms of authentication and IP address?!
R.,
04-04-2012 06:56 AM
Dears,
Please can you tell me the steps for basic SIP thrunk configuration on to
the 2801 router and CUCM 6.1 .
or any links for this . Thanks
BestRegards ,
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide