12-14-2022 02:06 PM
good day,
I recently installed a CME it seems good, but when I configure paging I hear no sound, see the configuration:
Router_Data_Voice(config)#ephone-dn 51
Router_Data_Voice(config-ephone-dn)#number 2000
Router_Data_Voice(config-ephone-dn)#paging
Router_Data_Voice(config-ephone-dn)#exit
Router_Data_Voice(config)#ephone 35
Router_Data_Voice(config-ephone)#paging-dn 51
Router_Data_Voice(config-ephone)#exit
Router_Data_Voice(config)#ephone 36
Router_Data_Voice(config-ephone)#paging-dn 51
Router_Data_Voice(config-ephone)#exit
Router_Data_Voice(config)#ephone 37
Router_Data_Voice(config-ephone)#paging-dn 51
Router_Data_Voice(config-ephone)#exit
See the test in the video, paging activated but no sound.
Solved! Go to Solution.
12-17-2022 05:49 AM
I found when configuring paging on CME for SCCP phones that the supposedly-optional multicast command on the paging DN is actually necessary. Take a look at the Chapter:Paging on the CME Admin guide for details. Without the multicast command I got the same behavior you did, with the call working but no sound.
CUCME System Administrator Guide - Chapter: Paging
Maren
12-17-2022 05:49 AM
I found when configuring paging on CME for SCCP phones that the supposedly-optional multicast command on the paging DN is actually necessary. Take a look at the Chapter:Paging on the CME Admin guide for details. Without the multicast command I got the same behavior you did, with the call working but no sound.
CUCME System Administrator Guide - Chapter: Paging
Maren
12-17-2022 10:16 AM
Good day,
You are right when I do the following code it fixed the problem.
ephone-dn 150
number 5000
name paging1
paging ip 239.1.1.10 port 2000
thank you
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: