02-20-2009 07:21 AM - edited 03-15-2019 04:21 PM
Hi,
Has anyone got any good pdf for configuring Nokia phones to work in dual mode with wireless and call manager setup.
Thanks,
Derek
03-09-2009 04:39 AM
Hi,
So you can see that Nokia device is connected to server and it has an IP-address?
If so, goto SCCP settings in the Nokia device. (Tools->Settings->Connection->SCCP settings).
What does the profile show?
Is it in registered state?
If you open the settings can you see 'My caller ID'?
Have you created Internet telephony profile? (Tools->Settings->Connection->Internet tel.)
-pasi-
03-09-2009 04:49 AM
Hi,
SCCP profile is Not registered
My caller ID - Not available
and I created Internet telephone and associated a SCCP profile to it.
03-09-2009 04:56 AM
Hi,
I'm affraid that you have to restart the server to get it working.
Also restarting Call Manager and TFTP services could help. But if you cannot do it, you can configure Nokia phone as Cisco 7970 type to CUCM.
-pasi-
03-11-2009 01:53 AM
deleting access point from my mobile phone helped.
Now i'm registered to CUCM, but in Nokia Call Connector client there isn't Outgoing call number, although i put the DN on CUCM.
Strange...
03-11-2009 02:04 AM
Very strange.
I guess restarting the phone doesn't help?
You could also try to remove SCCP profile and also internet tel. profile.
Reboot the phone and re-create profiles again
Also registering as Cisco 7970 would be worth of trying
-Pasi-
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide